Exotic Evora


The Lotus Evora 400 is a true super car. A fire breathing 3.5litre V6 will propel this rocket to 60 in under 4 seconds and on to a top speed of over 180 mph. But, when you have finished playing with the race controls, stopped grinning at the insane acceleration and started to use the car every day you will probably start to notice something. The audio system is quite frankly awful. The infotainment head unit is an Alpine 990 navigation multi media player and as such is really quite a performer but after that it’s not so good.

There are a pair of Clarion 5 inch speakers in the doors and a pair of unbranded tweeters on the ‘A’ pillars. There is even an 8 inch sub powered by a small Alpine amp just behind the driver seat but you’d hardly know it. Of course the audio system was low on the priority list when designing this car but the sound quality for a £70K+ car is not good at all.

So what should we do to improve it?

We don’t want to add a lot of weight and I think it’s important to keep it discreet. There is no real need to change the Alpine head unit unless more features are required but everything else will go. The car’s owner agreed and was most interested in a high quality sound at all levels. He did not need it to be extremely loud but of course it has to be able to compete with the exhaust! From our previous experience with the Lotus Evora we know that the low mid-range gets lost in the road noise so we need to fit a speaker that can cope with this and also EQ the car appropriately.

We opted for the super flexible Audison Prima AP8.9 Bit amplifier as the heart of the system.


This is an 8 channel, multi input amplifier with a full digital signal processor on board. This allows me to configure the amplifier outputs as required and then to tune the system to the exact requirements of the installation. It is also very compact for the output and will fit neatly in place of the Alpine sub amp.

The speaker set would be the wonderful Audison Voce K5. I would not use the passive crossovers as I can set all the frequency slopes and cut offs in the amplifier.

The choice for the sub was easy, the Audison APS8R.

This slim 8 inch sub is perfect for the existing enclosure once it has been acoustically treated with sound deadening.

The first job after carefully stripping the vehicle interior are the tweeters. I must confess that I have done this on a few times now and know they are a great fit. A very slight modification is required to the ‘A’ pillar but the original tweeters could still be replaced if required.

 I absolutely love this tweeter. It is smooth and very detailed without any harsh edges at the very high end. It is quite large but that allows it to be blended seamlessly with the mid-range.

 

The door speakers in the Lotus are in a good location high up at the front of the door but they are mounted in flimsy plastic collars. The K5 mid driver is somewhat deeper than the Clarion unit so a set of wooden spacers are made to increase the depth available.

                             
Naturally we apply sound deadening to the door both inside and out to improve the acoustic properties of the space. Since we will run this as a fully active system from the amplifier we have to rewire the speakers, tweeters and sub. This is a significant amount of cable and in such a compact car can be a challenge to lay but of course we are will ensure nothing can be seen.

Moving to the back we mount the amp in place of the Alpine unit. The first job is to construct an amplifier plate and trust me when I say that even with the compact AP8.9 Bit that space is tight!

A new power supply is taken to the boot mounted battery and everything is loomed and tied down tight to make sure nothing can move. Once the amp is in place we apply appropriate sound deadening to the area where the sub will mount and when the panel goes back into place there is absolutely nothing to show that any changes have been made (although if you look closely you can just see the Audison logo through the grille).

With everything built back up we can turn our attention to tuning the system. Of course we can only partially tune any new system as the speakers need time to run in so we will definitely want the car back in a week or so. However we can set up the time correction, phasing and crossover frequencies at this point.

As I mentioned the Audison AP8.9 Bit is an 8 channel amplifier so with 5 speakers it is configured as a 5 channel with a bridged output to the sub and mids ensuring full power is delivered where it is needed and because it has multi input capability the Alpine sub level control continues to operate.

With the time correction, initial EQ and phase adjustments done the sound stage is right in front of the driver and appears to come from just above the dashboard! There is now a sparkle and liveliness to the sound with a beautifully blended sub and mid response. Playing Michael Jackson’s Thriller is a great test and this does not disappoint, the sound is crisp and punchy with really wide stereo separation, the footsteps at the start seem to walk right across the dash and the door slam is epic. The bass is smooth and can be adjusted from off to ‘back massage’. Time will tell if the mid-range needs to come up more to compensate for the driving noise but right now with the engine running the music sounds spectacular.

At Car and Home Stereo we are experts at creating wonderful sound for your car. We are members of the Four Masters group of independent car audio specialists which means we can offer a national three year warrantee on selected products we install as well as offering a lifetime warrantee on all installation. If you would like to know more about how we can help you achieve your dream sound then please get in contact via the website, Facebook or call me om 01625 432707.

 

Stealth Installation: Audi Edition

At Car and Home Stereo, we have been installing high-performance audio for over 40 years now. As I’ve said before we have seen a continuous change in vehicles, equipment, and technology but one very noticeable change has been the drive to take up less space. Amplifiers have shrunk in size and subwoofers can operate in smaller enclosures, the ‘stealth’ install if you like.

I can clearly remember the 1990s when there were queues of Golf GTis waiting for subs and amps. One of our popular installs would be a Phoenix Gold Ti 600 amp and a pair of JL Audio 15w3 subs, what a sound! Of course, it filled the boot space and you couldn’t lift the sub box to get to the spare wheel but who cared when you could feel the bass right through to your bones.

It is true to say that these days our customers are more reluctant to sacrifice all their boot to amplifiers and speakers and as I said earlier, manufacturers have been working hard to reduce sizes without compromising performance but sometimes it’s nice to install a proper ‘muscle’ system and recently  I did just that in an Audi, let me take you through it.

The vehicle is an Audi S3 with the B&O sound system. The owner was reasonably happy with the front speakers but was completely disappointed with the bass performance. When we sat in it together the first thing I noticed was the huge gap in the midrange, quite an achievement considering there are 10 speakers, and of course, the sub bass was nonexistent. Looking in the boot we found the B&O ‘sub’ which was no more than a 6-inch paper cone speaker in a plastic box, awful! The Audi speakers are heavy, low sensitivity drivers which is why the midrange was so poor. So what should we do?

We wanted bass, lots of bass, so the obvious choice was the magnificent JL Audio 12w6 or rather two of them.

This is easily one of my favourite speakers of all time with masses of punch but with a sensitivity to play the fastest of bass lines cleanly.

Of course a sub like that wants lots of power and the perfect match is the JL Audio XD1000/1v2, one for each sub.

With 1000W on tap, this amplifier certainly has the drive but it also boasts a high damping factor to help keep control over that 12-inch cone. When a speaker is played loud the cone has to move a large distance, the 12w6 has a peak to peak maximum excursion of nearly 40mm! That cone builds up a lot of inertia and it is down to the amplifier to keep that under control. Damping factor could be considered to be the brakes of the system and without good brakes, the cone is just going to flop forwards and backward leading to a loose bass performance. It is the damping factor that helps keep everything tight and punchy.

I couldn’t allow this level of bass performance to be added to the car without dealing with the front end which I felt was completely inadequate. Nothing crazy. Just a simple front speaker upgrade with a 4 channel XD amplifier to power it. We settled on the super smooth JL Audio C5 650 component set and the XD 400/4v2 to power them. By using a 4 channel amp I could run the mids and tweeters fully active to eliminate the passive crossovers.

The next challenge is how to connect our system to the factory head unit. The Audi, like many other modern cars, uses the fiber optic MOST system to deliver audio from the entertainment and vehicle alerts to the amplifier. In order to retain this audio feed, we have to retain the B&O amplifier. The trouble, of course, is that the amplifier performance is hopeless. If  I connected my new amplifiers to the audio output of the B&O the sound would be almost as bad as before. Fortunately, we now have an arsenal of tools from JL Audio to remedy this. The simple but powerful FiX automatic processors and the incredible TwK audio processor.

The FiX processor is designed to connect directly to the factory amplifier speaker outputs. It can determine the issues in that speaker feed and automatically correct them. It is capable of accepting multi channel inputs and creating a pair of high quality pre amp outputs, it can even detect phase and time delayed signals and correct them.

With this connected to the B&O we now had a very clean audio feed that retained all of the vehicle and entertainment information and in reality we could have just connected this feed to our new system, but we weren’t finished yet! This system needed to be amazing so step up the JL Audio TwK88. This small but powerful device allows me to create virtually any system configuration I want. I have full control over every aspect of the the audio spectrum, I can control frequency, phase, time correction, equalisation and level. Every output can be fine tuned for the absolute best sound possible so I can take account of annomolies in the sound stage.

Although we left the rear speakers as standard they are faded almost completely off but they are adding a small amount of presence to the rear seats. The small mids in the door and the centre dash speaker have been disconnected as they only muddied the sound which is now wonderful. The sound stage is high and clear, right across the dashboard, the mid range has returned and the bass can go from subtle to armageddon!

So what does all this look like?

Even Henry looks impressed!

Once the boot floor cover goes back none of the electronics are on show, the sub box moves into the load space and surprisingly there is quite a lot of room left. Certainly enough for the shopping.

This system is massively impressive, it might not suit everyone from a size point of view but the sound quality would blow you away.

If you would like to know more about how Car and Home Stereo can improve the sound in your car please call me on 01625 432707 or better still call into the shop on Sunderland Street in Macclesfield.

 

Time for a New Lifestyle

The amazing Bose Lifestyle 650

Car and Home Stereo have been supplying exceptional Bose music and home theatre systems for over 20 years. I still remember the first time the original Acoustimass speaker cubes were demonstrated to me. Tiny speakers that twisted with a sound that seemed to fill the room, very impressive.

From that day we have stayed with Bose as the ‘Home’ in Car and Home Stereo. Some of the most exciting products have been the Lifestyle range of home cinema systems and over the years we have seen continuous and dramatic advances in technology and performance.

The core design feature of the Lifestyle systems has always been amazing, immersive sound from almost invisible speakers. The latest version, the Sound Touch Lifestyle 650 takes this to another level. Let’s take a tour of the technology and features of this incredible home cinema system.

 

The speaker system is revolutionary. The diminutive OmniJewel speaker houses two drivers positioned at the top and bottom with the sound radiating from the central grille.

 

This allows for complete 360-degree dispersal and creates a huge image stage all around the speaker. If the speaker is wall mounted then the reflected sound adds to the widened soundstage. The result when all five speakers are connected is a truly immersive sound with exceptional image separation, perfect for movies. To make installation easier the rear speakers have a wireless connection to the control unit meaning no more wires to chase around the room.

Of course no cinema system is complete without the woofer. This is what creates the power and excitement in the soundtrack.

 

 

The Acoustimass 300 bass unit

From the cutaway, you can see how the driver is positioned under the sleek glass top for maximum dispersion without rattling the floorboards. The tuned port below the speaker enhances the truly deep tones perfect for when the star destroyer thunders across the sky! Again the woofer connection is wireless meaning it can be positioned anywhere and just needs a power point.

But what if your room is an odd shape making it difficult to install the speakers in the ideal positions? Maybe you have high ceilings and wood floors which can produce odd reflections and ruin the sound. Well, Bose has the answer in their AdaptIQ system. This learns the layout of your room and listening positions and automatically adjusts the sound to compensate for anomalies. This means that every system will sound as good as the showroom and you will not need to carefully position your speakers to optimise performance.

Finally, we come to the gorgeous console.

The sleek Sound Touch 650 console

Available in black or white this sleek, glass topped unit is the brain of the whole system and packs an amazing suite of features and technology. It is designed to be the hub of your entire audiovisual system. There are multiple HDMI ports to accept all your devices such as Sky, Virgin, Blu-Ray player and others. There is a single ARC equipped HDMI port for connection to your television but if your TV does not have ARC then there is a dedicated optical port for the TV sound. The smart Bose remote control can be programmed to operate all your other devices which means a lot less clutter on the coffee table!

That takes care of all your video needs but what about your music? Well, the Lifestyle 650 is equipped with Bluetooth for direct streaming of music from your phone or tablet but more importantly, it has the Bose Sound Touch wireless music system on board. This simple system links the Lifestyle to your wifi network and any connected devices. This means it can see your iTunes or My Music library on your computer or network drive giving you instant access to all your music. If you have a Spotify or Deezer account you can access that from the Bose control app on your smart device and play it through the Lifestyle system. There is also internet radio access giving you just about every radio station in the world in digital clarity.

All this technology is incredibly easy to control either via the Bose Sound Touch app or the system remote control which I think is important as we shouldn’t feel intimidated by an overly complex control system. You barely need to look at the instructions as it is so intuitive to use, the system even talks you through the installation making sure no mistakes are made during setup all thanks to the Unify installation process. System updates are automatic via your wifi connection meaning your system will always be up to date and upgraded as necessary.

And there is so much more to the Lifestyle system that makes it one of the best home cinema systems available today, far too much to talk about here. I would urge you to call in for a demonstration so that you can experience the full power of this magnificent range.

 

A, AB, D or All Three? Pick Your Amp!

Amplifiers, such a range but which is right for you? I’d like to discuss amplifier types and applications.

As a Four Master, Car and Home Stereo are recognised as one of the leading car audio installers in the country. Our knowledge and experience mean that we are ideally placed to choose the right equipment and install it to the highest standard.  We offer a no pressure approach and are happy to offer advice on choosing the right equipment; just recently I had a great conversation over Facebook with an enthusiast in Australia over the benefits of the magnificent Rainbow Profi speakers.

Commonly I am asked “how many Watts is it?” but there is so much more to an amplifier than that. In reality, the Watts figure is often not the most useful specification when choosing between amplifiers. True it gives a simple indication of power but all too often that figure is heavily massaged to look higher. I have tested some so-called 3000W amplifiers to discover that they only made 200W at the terminals into a speaker load. Still an impressive output but certainly not 3000W as claimed.

But I digress; we are looking today at amplifier types and their uses. There are three types of amplifiers in main use today they are classed as A, AB and D. Although they all have the same purpose there are some fundamental differences between them that make them suit different applications.

At the heart of an amplifier are the power transistors, these are responsible for taking a small signal and making it larger, the classification describes how the transistors are used. Of course, there is a massive range of qualities and performance variations related to each type but we will stick to classes.

Class A, a typical sound wave.

As we know, Sound is an oscillating wave. This wave has a positive and a negative component but is symmetrical about the ‘t’ axis. So all we need is one big transistor that can amplify the whole signal to whatever power we want right? Well yes and this is the ideal solution for sonic accuracy; the high output signal is an exact copy of the small input signal. The best amplifiers I have ever heard have all been A class with a sound that is open, transparent and simply a joy to listen to.

The magnificent Audison Thesis Venti

However, all this purity comes at a price; huge power consumption. Those massive transistors are switched on all the time regardless of whether there is a signal there or not or how loud it’s playing. This means heat and lots of it which has to be dissipated. So we need massive power supplies and large heatsinks which make the amplifier large and somewhat inefficient, typically around 20%. That’s why we need to use such large power cable!

So how do we get better efficiency? Class AB.

 

There are many considerations here but in very simplistic terms it is possible to use one transistor to amplify the top half of the wave and another matched transistor to amplify the bottom half. This means that smaller transistors can be used and they are only on for half the time leading to efficiencies of 50 to 70%. This means less heat and smaller power supplies which help to keep the cost down.

The JL Audio JX360, a mainstay of many audio systems

There are some drawbacks to class AB, principally of which is crossover distortion.

As a matched pair of transistors has to amplify the whole wave it is essential that they turn off and on at exactly the right moment (the class B part). Imagine two people writing the letter S where one person only writes one-half and the other person completes it, there is bound to be a little error. The same is true in the amplifier leading to a very slight distortion of the output wave but in truth, modern design can almost eliminate this meaning we can have a really great sounding amp that is pretty efficient. This has meant that AB design has dominated the market for decades.

The highest efficiency is class D.
Let’s get something straight, D does not stand for digital. Class D is just another design type, a really clever one. This design uses pulse width modulation to generate the amplified output which involves switching the output transistors on and off at a very high rate typically around 300 kHz. This High switching frequency means any noise is well above our audible range and the PWM leads to astonishing efficiencies of around 95% or higher. So, at last, we have a very high power, high quality and very efficient amplifier. It is fair to say that most mainstream car amplifiers today are D class as they are smaller, lighter and generate less heat than their A or AB counterparts.

The JL Audio XD400.4, small but powerful

As with almost everything, there has to be a downside and with D class their Achilles heel is radio interference. The switching frequency mentioned might not be audible but it can do a fine job of broadcasting in the FM radio range. This can lead to reduced radio reception at certain frequencies, of course, modern design does mitigate the problem but nevertheless, it can still be an issue.

So to sum up, Class A for the best possible sound (ideal for tweeters), Class AB for improved efficiency (ideal for midrange) and Class D for maximum power from the smallest chassis (ideal for subwoofers). Wouldn’t it be great if there was an amplifier with all three? Well, there is and it is called the 5.1K from Audison.

 

The superb and versatile Audison 5.1K

This is one of my all-time favourite amplifiers and it is the amp that powers my own personal system. The detail of the class A front stage is phenomenal while the AB class mid-stage offers an amazing amount of punch. The D class sub stage has enough power to rattle the windows but offers a fidelity that allows a seamless blend with the rest of the audio stage. This unit never fails to impress and is not too big to make it impossible to fit. It does get hot if driven hard but does not require special cooling if mounted sensibly.

 

If you would like to hear what the 5.1K can do then please feel free to call into our shop on Sunderland Street in Macclesfield and I would be pleased to demonstrate it in our Discovery or on the demonstration stand in store. If you would like any more information on amplifiers in general please call me on 01625 432707.

 

 

Gain An Advantage: Amplifier

Anyone who has dabbled in car audio will have come across an amplifier at some point. They come in many shapes, sizes, and outputs but from the cheapest eBay special to eye wateringly expensive European exotica they all have one purpose, to get the musical signal to the speakers. The amplifier is, therefore, sat between the CD player and the speakers accepting the low-level input signal and converting it to a high power speaker output. I don’t want to get too bogged down in technicalities but let’s discuss the different types available and the controls we are given.

The JL Audio RD900.5 is a perfect example. This 5 channel, D class amplifier is capable of running a complete car audio system with front speakers, rear speakers, and a subwoofer. Alternatively, it could run a pair of front speakers bridged for enormous power plus a subwoofer once again. So, the RD900.5 is a very high performance, a flexible amplifier with a pretty small footprint making it easy to install.

The input stage is on the far left of this amplifier and comprises the usual red and white RCA connectors. There are 3 pairs that equate to the front, rear and sub input. Above these are three switches that allow for hi or low-level input, auto turn on mode and input channel selection (2, 4 or 6). Not all amplifiers are equipped with these selectors but these add to the RD900.5 flexibility.

The next stage is what interests us here, the frequency filter and the gain controls. The RD 900.5 is nonsymmetrical meaning that all channels are not identical. Channels 1 to 4 are for main speakers while 5 and 6 are for subwoofers. Therefore there is a variable high pass filter for 1 to 4 and a low pass filter for 5 and 6.

What is the filter for you ask? It is used to remove frequencies that are not required by the speaker on that channel. If we know we have a subwoofer fitted then it makes no sense to send the very low frequencies to the door speakers. Sub frequencies require a speaker cone to move a great distance and most door speakers simply cannot achieve this without distortion, I’m sure you have all heard a speaker trying too hard causing the classic ‘burping’ sound. In extreme cases, the speaker coil can be heard crashing into the back plate creating a clapping noise. Either situation is undesirable so to prevent these from occurring the frequency filter is applied to restrict the low tones.

The cutoff frequency is variable to suit different speakers and installations and setting it correctly requires the use of a signal generator. If you do not have access to one of these then it is possible to do roughly by ear, simply play music and slowly raise the filter frequency until there are no very low sounds in the speaker. The result will be a much clearer sound with no distortion. The mid definition should be greatly improved meaning vocals will cut through better. Typically the filter control is graduated and a very rough initial setting for a typical door speaker would be around 80Hz but you should experiment either side of this to find the best setting.

The subwoofer (low-pass) filter is the opposite of the high pass filter as it removes the higher frequencies sent to the sub. This ensures it only gets useful frequencies and we do not waste amplifier energy trying to make it play the higher tones.

Again the cutoff frequency is variable but what we want is to blend the sub with the main speakers so it is important to find a filter point that complements the high pass filter for the speakers.

So now we come to the input sensitivity, perhaps one of the most misunderstood controls. First and foremost it is not a volume control. Sure, it does increase the volume as you turn it but that does not mean it is increasing the amplifier power. Let’s consider what an amplifier is doing, it is taking a small signal and making it bigger. That signal is very dynamic meaning it is made up of loud and quiet parts, an extreme example could be Tchaikovsky’s 1812 Overture. Not something we listen to every day but it serves our example very well. If you are not familiar with the piece it starts very quietly and builds to a crescendo of orchestra and cannons. A more modern piece would be Warriors Dance by Prodigy but with fewer cannons!

The most important thing to consider when setting the sensitivity is that the amplifier only has a finite amount of power, let’s say 100Watts. That is represented by the upper dotted line on the graphs above. Our goal is to get the maximum, undistorted output.

If we look at a typical input sound wave it is obvious that there are loud and quiet parts. As we stated the amplifier is there to make this signal louder. Now let’s add the maximum amplifier power to the input signal graph.

As we increase the sensitivity we increase the size of the input signal at the input stage to the amplifier and remember there is a finite amount of power available. So what happens if we go too far?

As can be seen the nice smooth curves at the top and bottom of the loud spikes have been flattened which is clipped distortion. So yes we have a loud sound but it will be fuzzy and unpleasant. It will also damage speakers as the flat tops of the wave are a DC signal that will only induce heat into the voice coils. So if we take our example, the 1812 Overture, with the sensitivity set as above the quiet passages will sound good but the loud sections will be badly distorted and this will get worse the louder we play it.

For the best sound and maximum output, it is imperative that the loudest sounds are not clipped. Normally this would be set up with an oscilloscope but it can also be done with a voltmeter by measuring the output for maximum unclipped voltage as long as you know the true output power.

Fortunately, the JL Audio RD amplifiers have a brilliant feature, a clip indicator. This will light up if the signal is distorted by over ambitious sensitivity meaning setting up is made much easier.

At Car and Home Stereo, we want all our installations to give the best possible sound and that is why we carefully set up each and every one.

If you would like to have your system checked for any problems and to find solutions to these we would love to measure your car using our state of the art test equipment. These can highlight deficiencies in the sound stage that are difficult to locate just by listening.

As usual, I have run out of space so I’ll leave amplifier types and their best application for another time. But please don’t hesitate to call on 01625 432707 if you have any questions.

Simplicity Wins

At Car and Home Stereo we regularly install very high performance, in-car audio systems. It is intensely satisfying to build these systems as the musical performance they deliver is breathtaking. These systems do of course come with quite a high price tag so what can we do if the budget is a little more modest?

Let’s meet ‘James’. He’s 22 and just bought his first new car, a Ford Fiesta ST.

ford fiesta st

He loves music and thinks the standard sound system is OK especially since the car is equipped with Bluetooth so he can stream from his phone. After owning it for a while he starts to think about improving the sound but after lease payments and insurance he’s not got a lot to play with.

The first thing we will ask when he calls in to the shop is what type of music he listens to and what sort of sound he likes. The next step is to sit in his car and listen to the sound, often we will find the tone controls have been set to max bass and treble in an attempt to get a better sound. This usually just has the effect of making the sound muddy as the speakers cannot cope.

Now we know he would like a better bass performance for his music and more clarity from the main speakers. We need to add a subwoofer and better speakers to achieve a complete improvement. James has a limited budget and wants to get the best performance boost for the money.

We have a wide range of products available to suit all requirements but in this case an ideal solution would be the Rainbow Intellisub 8 and a set of JL Audio TR650 CSI components for the front doors. Total cost installed of £500. This very simple system would transform the performance of the audio and give years of pleasure.

But what if the budget will not stretch to £500, should we find cheaper products? The answer is always no. It is never worth compromising performance for price. There are cheaper products out there but they are always inferior and will not stand the test of time. The best option is to split the installation and have one part now and the next when funds allow. So which part first?

Simple, the sub. By adding the extra bass system there are two immediate benefits. First and most obvious is the bass improvement with greater depth and punch. The second improvement is more subtle, as there is no need for the main speakers to produce bass they start to sound a lot better. Certainly good enough while you save for the speakers!

I give this advice on an almost daily basis and it’s worth has been proved time and again with customers who have simple audio systems that far exceed their expectations. We have an in store demonstration stand that shows this off beautifully so please feel free to call into our shop on Sunderland Street in Macclesfield and we can start your journey to a better sound.

Cutting Edge! with JL Audio

Today let’s look at the range of fantastic high performance products from JL Audio.

Formed in 1975, JL Audio are based in Florida USA and from the very start, their passion has always been to produce the best possible products. Originally they concentrated on sub-woofers and they quickly earned an enviable reputation for amazing power and performance. More recently JL Audio have expanded their range to include speakers and amplifiers with the emphasis once again firmly on quality and performance.

_dsc0055

It’s true to say that the JL Audio range of subs has something for everyone. From small, discreet custom enclosures to high output monsters to true Hi-Fi quality audiophile drivers. The engineering expertise at JL Audio means that even their least expensive sub still sounds amazing and will work in a relatively small enclosure.

Every in car system will benefit from the installation of the dedicated bass speaker and at Car and Home Stereo we will make sure that it is fitted and set up correctly.

 

 

_dsc0047

Of course a sub-woofer always needs an amplifier and so the logical step for JL Audio was to produce their own range. Car and Home Stereo is proud to be a JL Audio Signature dealer which means we carry a wide range of products. The XD range of amplifiers is a particular favourite of mine. They only take up a small amount of space but deliver an amazing performance! From the compact XD 200.2 to the immensely powerful XD 1000.1 they offer a level of flexibility and performance unparalleled to anything else.

Never a company to stand still, JL Audio have just upped their game and released a new range of amplifiers designated the RD series.

 

_dsc0052

These units are extremely good value for money and sound amazing as they are based on JL Audio’s NexD D class technology. Multiple input configurations are available making for pretty much universal compatibility while the small footprint means installation is straight forward.

_dsc0048

JL Audio speakers are some of the best around. Even the entry level TR series have a detail and clarity many other more expensive speakers cannot compete with. Taking a step up to the C2 series and we are well on the way to a true Hi-Fi performance. Where space is tight the C2 400 (a 10cm speaker) punches far above its weight for low frequency. This has become my first choice for the Land Rover Defender and is more than capable of overcoming the road noise while still producing a full range performance.

One speaker range stands out though, the C5. This speaker range has a natural and transparent sound that is simply breathtaking. OK they are not cheap but that is not the point, where high fidelity is the goal you have to go a long way to beat this speaker. The tweeter alone is one of the smoothest speakers I have heard with vocal and piano pieces a joy to experience.

And of course there are many more products in the JL Audio line up. There are processors that allow seamless integration with factory standard audio systems. These units can repair the poor performance of the standard head units found in BMW, Audi,  VW and others that can not be changed meaning you do not have to put up with the stock audio.

There is also a range of very high performance marine speakers used on the like of Sunseeker power boats. However at Car and Home Stereo we are land locked and there has never been a big demand for these here!

The most important point is that, with JL Audio, we have a range of products that can suit any application and any performance requirement. We have the experience and resources to make sure we offer and install the best possible sound at any budget.

 

Give Tim a call to discuss your requirements or, better still, call in to the shop in Macclesfield for a coffee and a chat.