Invisible Installations

Following on from last week, I thought it would be good to share some images and details of the parts of an audio installation that you would not normally see.

We are a proud member of the Four Masters network. Four Masters is a national group of independent car audio installers that are committed to producing the finest audio experiences. This can only be done by adhering to the highest installation standards, offering the best equipment and having an in-depth knowledge of our systems and the cars on which we work.

At Car and Home Stereo, we constantly search out the best products that can fulfil our customer’s needs. Brands like JL Audio, Audison, Hertz and Rainbow offer amazing amplifiers, processors and speakers. Dynamat, Skinz and Stinger have sound deadening treatments and high-performance cables. Over the many years that we have been designing and installing audio systems we have developed skills and techniques that will consistently produce great results.

We are proud to have been featured in Driving Sounds, a leading industry magazine as recognition of our dedication to excellence.

So let’s say you have visited our shop on Sunderland Street in Macclesfield and together we have designed a system that will blow you away with its power and precision, you have dropped off your car and the garage door shuts. The next time you see it, your car might not look any different yet it now sounds amazing. Other than the amplifiers and speakers what exactly happens to achieve this and why does it take so long? Well, let’s go through it.

At the first discussion, we will have to sit in your car and listen to it but then we do it all over again, that time carefully listening for any issues. Once satisfied we will start the process of stripping down the parts of the interior we need to access. The door cards will need to come off as well as possibly the ‘A’ pillar trims for tweeters. Great care has to be taken here as there are often airbags incorporated into these areas.

All clips and electrical connectors must be safely disconnected not forgetting any moisture seals that must be retained. Any clips that fail will be replaced from our stocks. There will be mechanical linkages for the door release handle that must also be disconnected taking care not to kink the exposed cable.

Side trims will need to be removed for cable runs along with the back seats if we need to run cables to the boot. If we are upgrading the front speakers of a BMW then the front seats may also need to come out.

Finally, the boot trim and carpet may need to be stripped out to allow for amplifier or processor fitment.

All the trim will need to be carefully stored along with all the removed screws, bolts and clips, don’t want to lose any!

The next step will be acoustic treatment for the doors and other exterior panels. We use a combination of Dynamat Xtreme and Skinz acoustic damping sheet for the best results without adding excess weight. Dynamat eliminates panel rattle and significantly improves speaker performance while the Skinz sheet forms a thermal and acoustic barrier in the door meaning a warmer quieter car.

Any installation is only as good as the interconnects and here at Car and Home Stereo we make sure that everything we install is safe and reliable to ensure a lifetime of great sound. This means soldered joints, careful loom routeing and attention to detail. Details like using appropriately sized and applied cloth loom tape to retain the factory look, proper loom support and separation of cables to reduce interference.

  

Once the cabling is in place it is time to start installing the hardware. Car speakers are usually bespoke to the specific car but our aftermarket drivers are a standard size. This usually means we have to make special mounting collars to achieve a perfect fit. It is vital that the speaker assembly is properly sealed to the door to ensure there are no sound leaks that would ruin the sound and also to prevent water leaks from rain or car washing.

 

We always seal our collars to the door and also seal the speaker to the collar with silicone. This seal remains flexible and still allows removal if the speaker needs to come out. Tweeters will be carefully installed into original locations unless they need to be re-sited for sound stage reasons. Once the door cards and trims go back on there will be no visible evidence of change.

The final part of hardware installation is usually the amplifiers and processors. Some customers want a completely stealthy installation while others may want something to show off, we are experts at both. If the installation is to be stealthy then we have to consider several factors and foremost are ventilation and cooling. If the amplifier is to be hidden then it is vital that it can shed the excess heat generated. If space permits then under a front seat is common, this location is convenient however care should be taken as there can be heating ducts in this area which could compromise the amplifier performance.

 

Other common locations are cavities in the boot area. Behind trim panels and under the boot floor trim are acceptable as they are usually cool being next to the outside of the vehicle. Fortunately, modern D class amplifiers are much more efficient now and make less heat than AB class amps but cooling must always be considered.

We also have to consider access in the event that the amplifier settings need to be altered. Again modern DSP equipped amplifiers can be altered remotely via a PC but if it is analogue then we have to be able to adjust as necessary and that cannot be done easily if the amplifier is buried. All this means that when all is closed, there is no visible evidence of the additions

If we are producing something to show off then there are no limits to what we can do. From simple flat trim rebuilds to complete boot interior remodelling, we have done them all!

 

These show stopping installs can take a week to build but the results speak for themselves.

Finally, it’s time to turn on the system and tune it. This in itself can take several hours and will need to be redone after the speakers and subs have had a chance to run in in a week or so.

Tuning is an art and while there are tools to aid us I still prefer to do the final fine tune by ear. As a musician and electronic engineer, I have a great understanding of sound and I know I can produce a stunning sound. However, the tools are invaluable in initial response tuning. Pink noise generators, spectrum analysers, laptops and sophisticated software mean I have a level of control that is almost mind boggling. Learning your way around these tools is a full-time job and definitely not for the feint hearted. Fortunately, I love all this technology and have spent countless hours learning how to ring every last drop of performance from it.

  

Hopefully, this article demonstrates how we do things and why we are able to achieve such fabulous results. Car audio is our passion at Car and Home Stereo and we like to think our installations are some of the best. Retaining our Four Master status is important to us as it reflects our commitment to excellence as well as giving our customers peace of mind that their vehicle will be looked after and all installation will be to the highest standards. That is why we can offer a three-year warranty on our installed products and a lifetime warranty on all installation.

If you would like to know more please feel free to contact me for a chat or better still call in to our shop @ 01625 432707.

 

Posted in Car & Home Stereo and tagged , , , , , , , .

Leave a Reply

Your email address will not be published. Required fields are marked *